一级相变磁制冷材料的基础问题探究

由于一级相变磁制冷材料发生磁相变时有晶胞体积的突变,相变过程中有相变潜热存在,其磁化过程中有许多磁学问题有待于进一步探究.本文以LaFe13-xSix合金为研究对象,在现有对磁一级相变基础问题的分析基础上,对一级相变材料中系统熵变、等温熵变、绝热温变、热滞、磁滞、铁磁与顺磁态两相共存的温度区间和磁场区间、制冷能力的计算等磁学基础问题进行了较为细致的探究.分析表明,在忽略完全铁磁态和顺磁态对磁热效应的贡献时,Maxwell方程和Clausius-Clapeyron方程计算熵变的值具有等效性.等温磁化过程中升温和降温曲线包围的面积SABCE(磁滞的大小),实际上是升温过程和降温过程中磁场做的净功,等于相变潜热之差.磁滞和热滞的大小与磁化过程数据测量的时间有关,测量时间越长则滞后越小,当相变是平衡相变则滞后为零.另外,对温度和磁场诱导磁相变过程进行了分析,提出了一级相变磁制冷材料制冷能力的不同计算模型.本文对一级相变磁制冷材料的磁学基础问题研究有一定的参考价值.     

Frenkel-Kontorova模型中基底势振动的影响

基于一维Frenkel-Kontorova模型, 研究了振动的基底势对系统纳米摩擦现象的影响. 分别在相邻原子间的距离与周期势场的周期比为不公度(incommensurate)、可公度(commensurate)两种情形下, 探讨了基底势振动的振幅和频率对滞回现象(hysteresis)、最大静摩擦力以及超滑现象的作用机理. 两种情形下, 固定频率, 随着振幅的增大, 滞回区域的面积以及最大静摩擦力都将减小, 对于不同的频率, 减小的趋势不同. 系统甚至产生了超滑现象. 但当频率过大时, 振幅的改变不会影响滞回区域的面积以及最大静摩擦力的大小, 此时与基底不加振动时的情形一致; 当振幅固定, 随着频率的增大, 滞回区域的面积将增大, 对于不同振幅, 增大的趋势不同. 特别地, 对于某些固定的振幅, 最大静摩擦力随着振动频率的增大先逐步减小直至出现超滑现象, 再进一步增大频率, 最大静摩擦力又转而逐步增大. 这一现象类似于共振, 表明存在最佳的振动频率促进系统内所有原子的共同运动, 使得整个系统的最大静摩擦力几乎消失. 另外, 两种情形的区别是, 对于某些固定的频率(如ω= 0.5)和不同的小振幅, 不可公度情形往往具有相同的平均终止速度, 而可公度情形则不同, 表明相同前提下后者具有更复杂的动力学行为. 关键词： Frenkel-Kontorova模型 滞回 最大静摩擦力 超润滑     

被动锁模光纤激光器中泵浦滞后现象的研究

研究了基于非线性偏振旋转技术的被动锁模光纤激光器中的泵浦滞后现象.用非线性传输模型对泵浦功率滞后的机理进行了分析,发现此激光器中的泵浦滞后现象起因于光纤双折射与偏振选择共同作用引起的激光腔内非线性损耗特性.对泵浦滞后现象进行数值模拟和实验验证,结果与非线性传输模型分析的结论一致,并进一步证实了泵浦滞后现象不仅在连续光锁模产生孤子时存在,在锁模态下孤子的产生和泯灭过程中仍然存在.此外,随着激光腔内孤子数目的增多泵浦滞后现象愈加明显.     

示波器观测动态磁滞回线实验中曲线描绘浅析

给出了示波器观测铁磁材料物质磁滞回线的基本原理,针对实验中常见的错误,介绍了如何选取合理的数据并快速描绘磁滞回线的技巧。     

INVESTIGATION ON FATIGUE HYSTERESIS LOOPS MODELS OF FIBRE-REINFORCED CERAMIC-MATRIX COMPOSITES

纤维增强陶瓷基复合材料初始加载到疲劳峰值应力时, 基体出现裂纹, 纤维/基体界面发生脱粘. 在疲劳载荷作用下, 纤维相对基体在界面脱粘区往复滑移使得陶瓷基复合材料出现疲劳迟滞现象. 建立了纤维陶瓷基复合材料疲劳迟滞回线细观力学模型, 采用断裂力学方法确定了初始加载纤维/基体界面脱粘长度、卸载界面反向滑移长度与重新加载新界面滑移长度, 分析了4种不同界面滑移情况的疲劳迟滞回线. 假设正交铺设与编织陶瓷基复合材料疲劳迟滞回线主要受0°铺层、轴向纱线内纤维/基体界面滑移的影响, 预测了单向、正交铺设与编织陶瓷基复合材料在不同峰值应力与不同循环的疲劳迟滞回线, 与试验结果吻合.     

疲劳寿命估算的能量法及其实验研究

根据疲劳损伤滞后能等效原理,导出了缺口件与光滑件的当量应力关系,通过Ｎｅｕｂｅｒ公式和饱和应力应变关系,可确定当量应力取值;采用定量方程随机化方程,建立了γ－ｐ－ε－Ｎ曲线（置信度－可靠度－应变－寿命曲线）公式及其实验测试方式;根据疲劳累积损伤理论和γ－ｐ－ε－Ｎ曲线公式,得到了随机载荷谱作用下构件疲劳寿命估算公式;最后,实验验证了复杂实测载荷谱作用下,ＬＹ１２ＣＺ铝合金含孔试样的疲劳寿命估算结果     

A Mathematical Model for Hysteretic Two-Phase Flow in Porous Media

We develop a mathematical model for hysteretic two-phase flow (of oil and water) in waterwet porous media. To account for relative permeability hysteresis, an irreversible trapping-coalescence process is described. According to this process, oil ganglia are created (during imbibition) and released (during drainage) at different rates, leading to history-dependent saturations of trapped and connected oil. As a result, the relative permeability to oil, modelled as a unique function of the connected oil saturation, is subject to saturation history. A saturation history is reflected by history parameters, that is by both the saturation state (of connected and trapped oil) at the most recent flow reversal and the most recent water saturation at which the flow was a primary drainage. Disregarding capillary diffusion, the flow is described by a hyperbolic equation with the connected oil saturation as unknown. This equation contains functional relationships which depend on the flow mode (drainage or imbibition) and the history parameters. The solution consists of continuous waves (expansion waves and constant states), shock waves (possibly connecting different modes) and stationary discontinuities (connecting different saturation histories). The entropy condition for travelling waves is generalized to include admissible shock waves which coincide with flow reversals. It turns out that saturation history generally has a strong influence on both the type and the speed of the waves from which the solution is constructed.     

Magnetic behavior and role of the antiphase boundaries in Fe3O4 epitaxial films sputtered on MgO (001)

Magnetite Fe₃O₄ films were grown on single crystal MgO (001) substrates using facing target sputtering technique. Conversion Electron M?ssbauer Spectroscopy and magneto optical polar Kerr spectra have confirmed the stoichiometric repartition of Fe cations corresponding to the inverse spinel structure and the electronic structure characteristic of bulk Fe₃O₄. Hysteresis loops carried out at room temperature show that, in a 1 T applied magnetic field, only 60% of the saturation magnetization is detected. This behavior is discussed in correlation to the antiphase boundaries (APBs) observed by electron microscopy. Magnetic force microscopy studies show that magnetic domains are larger than the mean distance between APBs. Received 2 July 2001     

混合Heisenberg自旋体系动态相变的滞后标度

采用Monte Carlo方法对离散混合经典Heisenberg自旋体系在周期性外场驱动下动态相变行为进行了模拟计算.在典型Heisenberg自旋体系的哈密顿量基础上,引入表征非晶相的随机各向异性能项(比例为X)和表征晶体相的单轴各向异性能项(比例为1-X),考察了该混合自旋体系磁滞后回线面积A_area随X和单轴各向异性常数A及随机各向异性常数D的变化规律,并确定了该类自旋体系动态相变新的滞后标度关系A_area-A^δD^{η关键词： 海森堡模型 Monte Carlo模拟 磁滞标度 非晶纳米晶}     

Study on the Reinforcing Effect of Milled Carbon Fibers in a Natural Rubber Based Composite

Milled carbon fibers (MCF) have been tested at 2, 4, and 6 phr in a standard natural rubber compound with 45 phr of N375 carbon black. A dramatic increase in the low elongation moduli was observed even with only 2 phr of MCF. The presence of MCF confers anisotropic properties to the rubber compounds that can be measured by an anisotropic factor σ, defined as the ratio between the modulus parallel to the MCF prevalent direction over the modulus orthogonal to the MCF prevalent direction. It has been shown that the presence of MCF is able to reduce the mechanical hysteresis and also the compression set of the natural rubber compound. However, the tear strength properties are affected negatively. The present study demonstrates the feasibility and the advantages derived by the utilization of the carbon fibers as extra reinforcing filler in rubber compounds.